|
Flatpack S 24V/3x2kW
With a system depth of only 265mm and high efficiency rectifiers the Flatpack S systems will fit in most cabinets. Forseen for marine, offshore and railway applications. 
|
| ||
Micropack
The Micropack power system is designed for smaller loads, yet with a heavy functionality. With few standard building blocks easily mounted on a DIN rail, the system is fully on-site configurable. Voltages available 12, 24-30, 48VDC
Product Description
The Micropack power system extends your network one step further. With load ranges typically between 250W and 1000W, the Micropack is perfect for broadband extension and other high speed data and telecom applications. Suitable for both indoor and outdoor applications. With a few DIN rail mountable building blocks, the Micropack power system is design for on-site configuration and assembly. This allows fast and efficient logistics and enhanced flexibility. Broad functionality including ethernet based remote monitoring is provided by the Compack controller.
The Micropack power system is designed for smaller loads, yet with a heavy functionality. With few standard building blocks easily mounted on a DIN rail, the system is fully on-site configurable. Voltages available 12, 24-30, 48VDC
Product Description
The Micropack power system extends your network one step further. With load ranges typically between 250W and 1000W, the Micropack is perfect for broadband extension and other high speed data and telecom applications. Suitable for both indoor and outdoor applications. With a few DIN rail mountable building blocks, the Micropack power system is design for on-site configuration and assembly. This allows fast and efficient logistics and enhanced flexibility. Broad functionality including ethernet based remote monitoring is provided by the Compack controller.
| Micropack system concept.ppt |
Flatpack2 IBB System
The IBB Power systems and building blocks are built around our Flatpack2 rectifier and designed for applications as switchgear, telecom, emergency lighting, alarm systems etc.
The basic power core has 4-8 rectifier positions, a controller and a bulk DC output feed, that can be used in the FPC cabinet with possibility for optional DC distribution, battery breaker and connection unit.
The power core is prepared for any Flatpack2 rectifier module and depending on the rectifier choice the system output can be either of the following:
24V/40 - 300A, 48V/15 - 300A, 60V/15 - 266A
110V/10 - 134A, 125V/10 - 128A, 220V/5 – 73A
| datasheet_ibb_ds_-_2104924ds3_-_1_-_1.pdf |
Industrial bulk feed (IBF) unit
is designed for systems with 24-220 VDC output, from 2-16kW output power. The Power Core is built around the Flatpack2 rectifiers, and designed for applications such as switchgear, telecom, emergency lighting and alarm systems.
is designed for systems with 24-220 VDC output, from 2-16kW output power. The Power Core is built around the Flatpack2 rectifiers, and designed for applications such as switchgear, telecom, emergency lighting and alarm systems.
| ibf_ac-dc.pdf |
IBB-250WM Battery Charger System
The IBB-250WM battery charger system offers up to 200A at 24, 48 or 125V DC
The IBB-250WM is an industrial power system designed to deliver significantly more power than conventional battery chargers in wall- or rack-mounted applications. Compliant with industry standards (including NEMA PE-5), the IBB-250 WM’s reliability, modularity and advanced controller capabilities provide an infrastructure not just for today, but for years to come.
The IBB-250WM supports up to six rectifier modules (120A at nominal 125V output). IBB-250WME supports up to ten rectifier modules (200A at nominal 125V output). IBB-250WM is also available in 24V or 48V output. Both versions can be wall-mounted, rack-mounted, or equipped with a floor-mounting pedestal.
The IBB-250WM battery charger system offers up to 200A at 24, 48 or 125V DC
The IBB-250WM is an industrial power system designed to deliver significantly more power than conventional battery chargers in wall- or rack-mounted applications. Compliant with industry standards (including NEMA PE-5), the IBB-250 WM’s reliability, modularity and advanced controller capabilities provide an infrastructure not just for today, but for years to come.
The IBB-250WM supports up to six rectifier modules (120A at nominal 125V output). IBB-250WME supports up to ten rectifier modules (200A at nominal 125V output). IBB-250WM is also available in 24V or 48V output. Both versions can be wall-mounted, rack-mounted, or equipped with a floor-mounting pedestal.
| ibb_250wm_datasheet.pdf |