FP2 DC/DC Converters 24VDC or 48VDC outputs
The Flatpack2 DC/DC 1350W converters add new flexibility to the Flatpack2 power systems. Secondary 24VDC or 48VDC outputs can be provided from the main voltage battery.
The Flatpack2 DC/DC 1350W converters add new flexibility to the Flatpack2 power systems. Secondary 24VDC or 48VDC outputs can be provided from the main voltage battery.
DC/DC 1U rack can be installed directly under FP2 Flatpack system. Smartpack controller will control both supplies.
The galvanic isolated CAN bus can be connected to a supplying Eltek power system’s control system allowing monitor and control of the DC/DC converters without adding a separate controller.
Key benedits:
The galvanic isolated CAN bus can be connected to a supplying Eltek power system’s control system allowing monitor and control of the DC/DC converters without adding a separate controller.
Key benedits:
- Wide Input Range – 20 - 75 VDC
- Easy logistic – 1 unit can do (at least) 3 jobs (i.e. 24/24, 48/24, 60/24)
- High Efficiency - up to 91.7% (24V) and 93.8% (48V)
- Given the wide input range and OR-ing protection on output the efficiency is very high
- Boost Mode – delivers up to 2000W for 15s
- Most loads have short peaks – the extra boost power handles these
- Quick Trip Pulse
- High current (up to 3 – 4 x rated current) is delivered the first 10ms of a short to help open branch breaker, keeping other loads unaffected
| datasheet_flatpack2_dcdc_24v_48v_ds_-_241115_60x_ds3_-_1_-_2.pdf |
DC/DC CONVERTER PSC312-HV/48-25
|
DC/DC Converter PSC305 HV 80-275VDC
|
